27.8.2012
14:00 setting up logging for ICOS met sensors; 67m 
desktop sortcut MastMet67m starts logging at 67m Nokeval logger,
Module number 7, comport 14, speed 9600bps
ch1 temperature Rotronic mV signal
ch2 temperature Rotronic external Pt100
ch3 RH Rotronic mV signal
ch16 instrument box temperature Pt100
and the data goes to: C:\MastMET\67m_data ; HeLa

28.8.2012
07:52 setting up logging for Nokeval at 125m.
Module number 125, comport 18, speed 9600bps

The channel setup is following. The Rotronic signals are nonsense, malfunction.
ch1 temperature Rotronic mV signal
ch2 temperature Rotronic external Pt100
ch3 RH Rotronic mV signal
ch4 Uplooking pyranometer mV signal
ch5 Downlooking pyranometer mV signal
ch16 instrument box temperature Pt100
and the data goes to: C:\MastMET\67m_data; HeLa

04.09.2012
08:30-12:00 installations at 125m box,
Rotronic replaced, now VA528*1048 with modified weather shield there,
mV and Pt sensors seem to be in wrong order, channel coefficients
has to be changed. 3D thies connected to Moxa iport port1 but not tested yet,
powered from 24VDC. The Thies cable has been cut shorter, so not any
original cable numbers (tags) anymore. Will be documented separately using
the numbers and colors on the cable. HeLa

05.09.2012
08:54 the nokeval 125m channels changed, 1 is t_Pt and 2 t_mV,
the extra Pt100 sensor and t_mV is the hygroclip millivolt temperature signal.
The actual connections will be changed at mast later, 67m and 125m setups
will be same.
The up and downlooking pyranometers (Middleton solar SK08)
are in mastmet125 channels 4,5 now with millivolt output.
Need conversion factors to be set -->w/m2; HeLa

13.09.2012
14:54 at 67m nokeval ch1 and ch2 changed according to 125m setup,
ch1 is Pt100 ext and ch2 is temperature mV signal.
Instrument box grounding connected. HeLa