18.01.13
Käynnistetty uusi mittaus mastossa 33m:n korkeudella. Kalibrointitiedosto:

1.000000 0.000000 IR_in
1.000000 0.000000 in_ref_t
1.000000 0.000000 IR_out
1.000000 0.000000 out_ref_t 
1.000000 0.000000 NDVI_in1_652nm
1.000000 0.000000 NDVI_in2_860nm
1.000000 0.000000 NDVI_out1_652nm
1.000000 0.000000 NDVI_out2_860nm
1.000000 0.000000 PRI_in1_531nm
1.000000 0.000000 PRI_in2_570nm
1.000000 0.000000 PRI_out1_531nm
1.000000 0.000000 PRI_out2_570nm
1.000000 0.000000 t_Pt_16m
100.0000 -40.0000 t_mV_16m
1.000000 0.000000 RH_16m
1.000000 0.000000 t_box_Pt

11.04.2013
13:25 NDVI sensors connected to 33m logging system, channels 5...8.
Calibration coefficient -1 set respectively to get positive readings. HeLa, RP

06.05.2013
~0730--- New 3D anemometer Thies 4.3830.20.340 installed to the top of the mast.
Connected to NPort serial server, found at IP 172.29.1.125, port3 as com17 at Gaslog-PC
Set to RS-422 and 38400bps,n,8. HeLa, ML

07.05.2013
~10:25 set logging for Top 3D anemometer: data folder C:\MastMET\US_Top
hourly datafiles, logging icon on desktop US_Top.
Anemometer settings:
00BR00007 - baudrate 38400 8N1
00OR00001 - data transmit interval 100ms
00AV00001 - averaging 100ms
00AM00000 - averaging method vector (WV, WD)
00HT00001 - sensor head heating automatic at error, and below +2degC
00TT00002 - telegram 02;
Data format according to telegram 02 (default telegram):
(STX)WVA;WDA;WVE;WDE;VT;THIES status;CS(CR)(ETX)
Where:
(STX) start byte, 02h, hexadecimal
WVA xxx.x wind velocity azimuth
WDA xxx.x wind direction azimuth
WVE +-xxx.x wind velocity elevation
WDE +-xx wind direction elevation
+-xx.x acoustic virtual (air) temperature
xx THIES status, hexadecimal
CS xx checksum , hexadecimal (01...30)
CR carriage return
(ETX) end byte, 02h, hexadecimal; HeLa