02.01.14
12:39 MastMet67 did lost connection to the Mast. The program was reset and restarted,
but no connection was established. The error message was: Port open failed!
13:30 - 14:00 Gaslog computer was reset and programs were restarted. VH

10.02.14
09:50 - 10:20 125 m level sample line flow meter was detached from the line and filter was inspected by Topi

08.03.14
06:38 MastMet125m, MastMet67m, MastMet16m and US_Top had lost connection to the Mast. The error message was:
"Port open failed!"
10:50 - 11:20 Gaslog computer was reset several times and the USB cable was detached/attached also several times,
but the connection to the Mast was not recovered. VH
11:30 - 12:40 The Mast and Nokeval were also reset, but no success. VH

10.03.14
08:00 Connection to the Mast has recovered, programs were restarted. VH

14.03.14
07:15 US_Top program has stopped around five o'clock this morning. 
The program was stopped, but remote restart didn't work. VH
09:10 - 09:25 Gaslog computer was reset, but it didn't help. VH

18.07.14
"Eilen lähes lopulliseen asemaan saatettu siellä n 67m tienoilla olevan alaspäinkatsovan PAR anturin sekä 
nettosäteilyanturin kytkennät.
Kytketty mastmet67m ohjelman logattaviksi siten että kanavassa 4 on PAR ja netto on kanavassa 5.
Herkkyyttää systeemiin on koitettu saada laittamalla nokeval.kal tiedostoon em kanaville kertoimet siten, 
että PAR tulee raakasignaalina kerrottuna luvulla 1000 eli mikrovoltteina (=mV x 1000). Vastaavasti 
nettoanturin millivolttilukema kerrottuna luvulla mV x 100 (mössää muuten datafilun sarakkeet)
PS gaslog, meteorologiasiirtymä koneesta pois on kehitteillä ts muille mittauksille kuin tuo diagnostiikka 
on koneesta tilaus vetämässä
-Heikki"

03.09.14
~12:20 The top (125 m) T/RH Rotronic changed, the fan of the old one wasn't working. ML, JL, TP
-Mastmet125 ohjelma seis tarkoituksella vai vahingossa - dataa ei kuitenkaan ole aina 13.10. klo 09:25 asti

13.10.14
Mastmet125 ohjelma käyntiin